Showing 1–9 of 10 results

  • AUGYMER Pop Up Camping Tent, 2-3 Person Tent for Camping Automatic Portable Lightweight Backpacking Tents with Carry Bag for Camping Hiking (Copy)

    $495.00

    A state-of-the-art version of out popular Basic Rope Access harness. New lightweight aluminum D rings are used on side positioning, chest, and dorsal fall protection connections.xWide anatomical waist pad for increased comfort and added back support. Modular work/tool pouch system is included. New Cobra ANSI Z359.1 certified aluminum quick connect leg buckles are used for ease of donning. Leg pad orientation can be adjusted to allow the user to obtain a perfect placement of the leg pad system to accommodate personal preferences. Attachment points at waist, hips, chest, back (lumbar) and back (dorsal). Chest harness specifically designed to incorporate a chest ascender (not included) for rope access work and the shoulder straps are specially tailored to reduce chafing of the neck. Weight 5lb. 6oz.

    • Sizes S, M, L, XL
    • Meets ANSI/OSHA Class III full body harness standards
     Removable contoured shoulder pads included.

  • Petzl Avao Bod Croll Fast International Version Harness

    $504.95
    • Integrated CROLL ventral rope clamp for ascending ropes
    • Built for comfort:
      – X-shaped dorsal construction wraps to reduce pressure points during prolonged suspension
      – semi-rigid, wide waistbelt and leg loops for excellent support; sculpted and lined with breathable perforated foam for comfort during suspension
      – foam shoulder straps are widely spaced to reduce neck chafing; when the waistbelt is loaded, they help distribute this load over the shoulders
      – hooking points for installing a PODIUM seat for use in prolonged suspension
    • Practical adjustment:
      – waistbelt and shoulder straps equipped with self-locking DoubleBack buckles for quick and easy adjustment
      – leg loops equipped with FAST buckles for quick and easy opening and fastening without the need to readjust them, even while wearing gloves
      – fold-away side attachment points prevent accidental snagging
    • Facilitates carrying and organization of tools:
      – six pre-shaped equipment loops with protective sheath
      – four CARITOOL tool holder retainers
      – two slots for TOOLBAG tool pouch
    • Less traumatizing post-fall position:
      – in case of a fall on the dorsal attachment point, the load is distributed over the leg loops, allowing the user to remain suspended longer while awaiting rescue
    • The international version has a fall indicator: a red strap appears on the dorsal attachment point after a fall to indicate that the harness should be retired.

    Specifications

    • Ventral attachment point: attachment for a descender or a positioning lanyard for use in single mode
    • Lateral attachment points: attachment for a positioning lanyard for use in double mode
    • Sternal attachment point: fall arrest system attachment
    • Dorsal attachment point: fall arrest system attachment
    • Rear attachment point on the waistbelt: restraint lanyard attachment
    • Certification(s): ANSI Z359.11, CSA Z259.10, CE EN 361, CE EN 358, CE EN 813, CE EN 12841 type B
    • Material(s): nylon, polyester, aluminum, steel
  • Petzl Panga Helmet

    $259.95

    PANGA is a one-size-fits-all helmet, durable and easy to use, designed for group and club use. Its FLIP&FIT system allows the headband size to be easily adjusted by an operator, or by the user. This system also offers protection for the headband during storage and transport. PANGA is composed of three removable components, all of which are available as replacement parts: shell, liner and harness/headband. Helmet available in a pack of four units and in three colors.

    Description

    • Easy to use:
      – one size for easy equipment management 
      – available in three colors
      – FLIP&FIT system allows immediate placement of the headband in a low position so the helmet fits securely on the head. This system allows the headband size to be easily adjusted by an operator, or by the user
      – areas designated for applying a visible marking on the outside of the shell
    • Designed for intensive use and an extended lifetime: 
      – rugged shell construction
      – expanded polypropylene liner (EPP) for excellent strength 
      – FLIP&FIT system enables the headband to be retracted inside the helmet, to protect it during storage and transport
    • Helmet composed of three removable components: shell, liner and harness/headband. These components are all available as replacement parts, extending lifetime and optimizing cost for the operator

    Specifications

    • Material(s): acrylonitrile butadiene styrene, expanded polypropylene, polyester, nylon
    • Certification(s): CE EN 12492, UIAA
    • Head circumference: 48-61 cm
    • Weight: 330 g
  • Petzl Vasak Crampons

    $179.95
    • Thinner frame reduces weight
    • Available with LEVERLOCK UNIVERSEL or FLEXLOCK bindings, in order to attach to all types of boots, with or without front and rear welts
    • ANTISNOW system, included with crampons, limits snow buildup in any snow conditions
    • Horizontal front points ensure solid purchase in hard snow

    Specifications

    • Number of points: 12
    • Boot sizes: 36-50
    • Certification(s): CE, UIAA
  • Yates 309 SWAT/Special Ops Harness

    $180.00

    Re-designed SWAT harness utilizes a fully padded structural duty belt which is designed to replace the existing padded duty belt worn by SWAT Officers. Super stiff scuba webbing is sewn to the outside of the belt to facilitate hanging of leg holsters, ammo pouches and gas mask bags. Stiff scuba webbing belt attached to inside structural webbing by velcoe for easy adjustment and positioning of holsters and pouches. New Cobra Quick Connect Waist Buckle is now configured to allow the user to have the buckle on the left side or right side of the belt so that it will not interfere with positioning of the side weapon depending if the user is right or left handed. Gear loops can now be adjusted to any position along the belt. Leg loop portion of harness can be quickly attached to the belt with a standard locking carabiner (not included). This converts the duty belt portion of the system into a fully functional rappel harness. Both Front and rear attachments are rates at 3,6000 lbf minimum strength. Weight 1 lb. 12 oz.

    • Sizes S(27-32″), M(30-35″), L(34-39″), XL(38-42″)
    • Quick leg adjustment with camlock bucklesMeets ASTM/ANSI/OSHA Seat harness standards
    • Fully structural rear attachment loop
    • Meets ASTM/ANSI/OSHA Seat harness standards

  • Yates 387 Basic Rope Access Harness

    $450.00

    A tuned down version of the RTR Tower Access harness. Waist belt portion of the harness uses smaller sized D rings to save weight and reduce bulk. New wider anatomical waist pad for increased comfort and added back support. Modular work/tool pouch system is not included. Leg pad orientation can be adjusted to allow the user to obtain a perfect placement of the leg pad system to accommodate
    personal preferences. Easily adjustable for variations in clothing by use of camlock buckles. Attachment points at waist, hips, chest, back (lumbar) and back (dorsal). Chest harness specifically designed to incorporate a chest ascender (not included)for rope access work and the shoulder straps are specially tailored to reduce chafing of the neck. New for 2016 Rope Access Harness comes with aluminum D-Rings on sternal, dorsal and hip attachment points. Weight 5lb.
    • Sizes S, M, L, XL
    • Removable contoured shoulder pads included.
     UL classified to meet NFPA 1983/2012 edition standards
    • UL Classified ANSI/OSHA Z359.1-2007 and CAN/CSA Z259.10-12 harness standards

  • Yates Adjustable Dual Leg 6 Feet Free Fall Lanyard

    $180.00

    Twin lanyard legs are made from heavy duty 1 inch, 9800 lbf. webbing, adjustable from 4.5-6 foot length. Available with aluminum or steel ladder hooks. This allows for the worker to safely connect at foot level. Ideal for transmission tower and wind turbine workers.

    • Maximum free fall distance allowed 6 feet. Full activation of lanyard extendes absorber an additional 48 inches.
    • New snap hooks located on shock absorber and legs meet 3600 lbf. (15kN) side load gate strength requirements of ANSI Z359.12-2009 standard.
    • UL Certified to meet ANSI/ASSE Z359.12-2009 and ANSI/ASSE Z359.13-2009 standard
    • NEW Now available in adjustable length lanyard in solid black for stage rigging industry(876B)
  • Yates BPA01A NEW 100% Tie Off Aluminum Step Bolt Hook Lanyard. w/6Feet Free Fall Potential

    $450.00

    Twin lanyard legs are made from 12mm BlueWater Armortech Rope and swival 3/4″ steel snap hooks. Designed specifically for climbing Transmission Tower step bolts> Rated Step Bolts can be safely connected directly with step bolt snap hooks. Maximum length of lanyard 38″. Lanyard has a new DMM ANSI Certified swivel between shock pack and Armortech rope legs. DMM captive eye ANSI certified carabiner used to connect shock pack to users sternal D-ring on harness. Ideal for transmission and communication tower workers.

     

    • Maximum free fall distance allowed 6 feet. Full activation of lanyard extendes absorber an additional 48 inches. Individually serial ndlot numbered
    • New Unique Aluminum Step Bolt Hooks on 12 mm Armortech rope legs legs meet 3600 lbf. (15kN) side load gate strength requirements of ANSI Z359.12-2009 standard.
    • UL Certified to meet ANSI/ASSE Z359.12-2009 and ANSI/ASSE Z359.13-2009 standard

     

    SPECIAL NOTICE ON STERNAL ATTACHMENT OF LANYARD FOR FALL ARREST.

    ANSI Z359.11-2014 Sternal Attachment
    3.2.2 Sternal.

    The sternal attachment may be located as shown in Figure 4, and used as an alternative fall arrest attachment in applications where the dorsal attachment is determined to be inappropriate by a competent person and where there is no chance to fall in a direction other than feet first.
    E3.2.2 See Figure 2(a) & 4. The sternal attachment element should be used only when the likely fall distance is not greater than 2 ft.
    3.2.2.2 When loaded at the sternal attachment to arrest a fall, the design of the FBH (full body harness) shall direct load through the shoulder straps supporting the user and around the thighs.

  • Yates SPRAT48 NEW 100% Tie Off 48″ (Sternal Attachment)Large Hooks. w/6Feet Free Fall Potential

    $345.95

    100% Tie Off twin lanyard legs are made from 12mm BlueWater Armortech Rope and 2.5″ opening aluminum ANSI Certified Large Snap Hooks. Designed specifically for Rope Access Work and Transmission Tower workers who want a Fall Protection Lanyard for sternal harness attachment. Maximum length of lanyard is 48″. Lanyard has a new YATES 1023 Medium sized rigging ring between shock pack and Armortech rope legs. DMM captive eye ANSI certified carabiner used to connect shock pack to users sternal D-ring on harness.This 100% Tie Off Lanyard is specifically designed to be incorperated into the sternal D-ring on harnesses certified to the new ANSI Z359.14 Standard. This new harness standard from ANSI allows for sternal fall protection attachment of lanyards. Weight: 1lb 12oz.

    • YATES 1023 Medium sized rigging ring is CNC milled from 1/2″ thick high strength 7075-T6 aircraft aluminum Plate. Durable “Hard Coat” anodised. Certification by UL for NFPA “G” and ANSI Z359.1. Individually proof loaded to 3,600 lbf. Anchor Ring inside diameter 1.4″. Outside diameter 2.2″. Strength 9,000 lbf. (40kN).
    • Maximum free fall distance allowed 6 feet. Full activation of lanyard extendes absorber an additional 48 inches. Individually serial and lot numbered
    • New 2.5″ opening aluminum ANSI Certified Large Snap Hooks located on 12 mm Armortech rope legs legs meet 3600 lbf. (15kN) side load gate strength requirements of ANSI Z359.12-2009 standard.
    • Certified to meet ANSI/ASSE Z359.12-2009 and ANSI/ASSE Z359.13-2009 standard

    SPECIAL NOTICE ON STERNAL ATTACHMENT OF LANYARD FOR FALL ARREST.

    ANSI Z359.11-2014 Sternal Attachment
    3.2.2 Sternal.

    The sternal attachment may be located as shown in Figure 4, and used as an alternative fall arrest attachment in applications where the dorsal attachment is determined to be inappropriate by a competent person and where there is no chance to fall in a direction other than feet first.
    E3.2.2 See Figure 2(a) & 4. The sternal attachment element should be used only when the likely fall distance is not greater than 2 ft.
    3.2.2.2 When loaded at the sternal attachment to arrest a fall, the design of the FBH (full body harness) shall direct load through the shoulder straps supporting the user and around the thighs.